Part Number Hot Search : 
EGFZ15D HR002AM LVA519 MAX4391 0074B MJH16004 XXXGX MX621P
Product Description
Full Text Search
 

To Download KIC7WZ14FK Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 SEMICONDUCTOR
TECHNICAL DATA
SCHMITT INVERTER FEATURES
High output drive : 24mA(min.) @VCC=3V. Super high speed operation : tpd 3.2ns(typ.) @VCC=5V, 50pF. Operation voltage range : VCC(opr)=1.65~5.5V. Power down protection is provided on all inputs and outputs.
KIC7WZ14FK
SILICON MONOLITHIC CMOS DIGITAL INTEGRATED CIRCUIT
B C
1
8
DIM A B
E
C D E F G H
DD
A
MILLIMETERS _ 2.0 + 0.1 _ 3.1+ 0.1 _ 2.3 + 0.1
0.5 0.2+0.05/-0.04 _ 0.7+ 0.1 _ 0.12 + 0.04 0 ~ 0.1
D
4
5
MAXIMUM RATINGS (Ta=25
CHARACTERISTIC Power Supply Voltage DC Input Voltage DC Output Voltage Input Diode Current Output Diode Current DC Output Current DC VCC/ground Current Power Dissipation Storage Temperature Range Lead Temperature (10s)
)
SYMBOL VCC VIN VOUT IIK IOK IOUT ICC PD Tstg TL RATING -0.5~7 -0.5~VCC+0.5 -0.5~VCC+0.5 -50 -50 50 50 200 -65 150 260 UNIT V V V mA mA mA mA mW
F
H
G
US8
MARKING
Type Name
Z14
Lot No.
PIN CONNECTION(TOP VIEW)
1A 1 3Y 2 2A 3 GND 4 8 VCC 7 1Y 6 3A 5 2Y
2003. 3. 11
Revision No : 1
1/4
KIC7WZ14FK
Truth Table
A L H Y H L
1A 2A 3A 1Y 2Y 3Y
Logic Diagram
Recommended Operating Conditions
CHARACTERISTIC Supply Voltage Input Voltage Output Voltage Operating Temperature SYMBOL VCC VIN VOUT Topr RATING 1.65~5.5 1.5~5.5 0~5.5 0~5.5 0~VCC -40~85 0~20 (VCC=1.8V 0.15V, Input Rise and Fall Time dt/dv 2.5V 0.2V) 0~10 (VCC=3.3V 0.3V) 0~5 (VCC=5.5V 0.5V) Note1 : Data retention only. Note2 : VCC=0V. Note3 : High or low state ns/V (Note2) (Note3) (Note1) UNIT V V V
2003. 3. 11
Revision No : 1
2/4
KIC7WZ14FK
ELECTRICAL CHARACTERISTICS DC Characteristics
CHARACTERISTIC SYMBOL TEST CONDITION VCC(V) 1.65 1.8 Positive Threshold Voltage VP 2.3 3.0 4.5 5.5 1.65 1.8 Negative Threshold Voltage VN 2.3 3.0 4.5 5.5 1.65 1.8 Hysteresis Voltage VH 2.3 3.0 4.5 5.5 1.65 1.8 VIN=VIL IOH=-100 A 2.3 3.0 High Level VOH 4.5 IOH=-4mA IOH=-8mA IOH=-16mA IOH=-24mA Output Voltage VIN=VIH IOH=-32mA 1.65 2.3 3.0 3.0 4.5 1.65 1.8 IOL=100 A 2.3 3.0 Low Level VOL 4.5 IOL=4mA IOL=8mA IOL=16mA IOL=24mA IOL=32mA Input Leakage Current Power Off Leakage Current Quiescent Supply Current IIN IOFF ICC VIN=5.5V or GND VIN or VOUT=5.5V VIN=5.5V or GND 1.65 2.3 3.0 3.0 4.5 0~5.5 0.0 1.65~5.5 MIN. 0.6 0.7 1.0 1.3 1.9 2.2 0.2 0.25 0.40 0.6 1.0 1.2 0.1 0.15 0.25 0.4 0.6 0.7 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 Ta=25 TYP. 0.5 0.56 0.75 0.98 1.42 1.68 0.48 0.51 0.62 0.76 1.01 1.20 1.65 1.8 2.3 3.0 4.5 1.52 2.14 2.75 2.62 4.13 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.16 0.24 0.25 MAX. 1.4 1.5 1.8 2.2 3.1 3.6 0.8 0.9 1.15 1.5 2.0 2.3 0.9 1.0 1.1 1.2 1.5 1.7 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 0.1 1 1.0 Ta=-40~85 MIN. 0.6 0.7 1.0 1.3 1.9 2.2 0.2 0.25 0.40 0.6 1.0 1.2 0.1 0.15 0.25 0.4 0.6 0.7 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 MAX. 1.4 1.5 1.8 2.2 3.1 3.6 0.8 0.9 1.15 1.5 2.0 2.3 0.9 1.0 1.1 1.2 1.5 1.7 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 10 10 10 A A A V V V UNIT
2003. 3. 11
Revision No : 1
3/4
KIC7WZ14FK
ELECTRICAL CHARACTERISTICS AC Characteristics
CHARACTERISTIC SYMBOL TEST CONDITION VCC(V) 1.65 Propagation Delay tPLH tPHL 1.8 CL=15pF, RL=1M 2.5 0.2 3.3 0.3 5.0 0.5 Propagation Delay Input Capacitance Power Dissipation Capacitance tPLH tPHL CIN CPD CL=50pF, RL=500 (Note) 3.3 0.3 5.0 0.5 0 3.3 5.5 MIN. 2.5 2.5 1.8 1.5 1.0 1.8 1.2 Ta=25 TYP. 7.6 6.3 4.3 3.3 2.7 4.0 3.2 2.5 11 12.5 MAX. 13.1 10.9 7.4 5.0 4.1 6.0 4.9 Ta=-40~85 MIN. 2.5 2.5 1.8 1.5 1.0 1.8 1.2 MAX. 14.5 12 8.1 5.5 4.5 6.6 5.4 ns pF pF ns UNIT
Note : CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure2.) CPD is related to ICCD dynamic operating current by the expression : ICC(opr)=CPD VCC fIN+(ICCstatic)
AC Loading and Waveforms
VCC VCC A INPUT CL RL OUTPUT
INPUT
CL includes load and stray capacitance Input PRR=1.0MHz ; t w =500ns
Input=AC Waveform ; t r =tf =1.8ns PRR=variable ; Duty Cycle=50%
FIGURE 1. AC Test Circuit
FIGURE 2. I CCD Test Circuit
t r =3ns
t f =3ns 90% 50% 10% tw VCC
INPUT
GND
t PLH
t PHL VOH
OUTPUT
50%
50% VOL
FIGURE 3. AC Waveforms
2003. 3. 11
Revision No : 1
4/4


▲Up To Search▲   

 
Price & Availability of KIC7WZ14FK

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X